Success Stories

caseHistory featured image

EuroFos

The Dry Run Synchronisation Project started in December 2020, when DSP remotely assisted EuroFos in configuration and operational testing issues. At the same time DSP LAB prepared a software solution using SNX and groovy to synchronise operational data from the N4 3.6 test environment to the current 2.6 production, for the following dry run testing: […]

Read More
2020-2021
caseHistory featured image

PD Ports Teesport

A major N4 upgrade involved DSP in a 1-year project. The project started in June 2020, when DSP remotely assisted PD Ports in rewriting all of their test use cases, to bring them up to date with the latest operational processes. This was successfully completed in September 2020. In November 2020 DSP remotely assisted PD […]

Read More
2020-2021
caseHistory featured image

QTerminals

This project has been conducted in a remote way due to pandemic reasons. In history, no similar remote projects have taken place on this scale. As part of the latest N4 implementation, QTerminals required to maximize the usage of the N4 system to improve the overall efficiency of the terminal. The project was to implement […]

Read More
2020
caseHistory featured image

EUROGATE CTB

Eurogate CTB has successfully migrated from their previous Terminal Operating System to Navis N4 on May the 1st 2020. Located in Bremerhaven, Germany and offering complete intermodal connections to 130 ports worldwide, CTB is one of Northern Europe’s busiest and most important container terminals, handling over 2 million TEUs annually via continuous 24/7 Straddle operations.  […]

Read More
2018-2020
caseHistory featured image

APM Terminals Port Elizabeth

DSP has been in charge of testing the new semi-automated gate at APM Terminals Port Elizabeth. On April 24 2020 APM Terminals Elizabeth started receiving over-the-road (long-haul) trucks through its new semi-automated gate facility. DSP has been supporting the terminal since May 2019 closely working in association with Interface, Equipment, IT and Operations teams.Nadeem Usmani, […]

Read More
2020
caseHistory featured image

SGTD Doraleh Container Terminal

DSP has provided SGTD (Société de Gestion du Terminal à conteneurs de Doraleh) a combination of process improvements, re-implementation of NAVIS N4 Expert Decking, Prime Route, and Autostow. Thanks to DSP team and a dedicated operation and planning team Djibouti Container terminal has achieved all previous records. Doraleh Container Terminal is a joint venture between […]

Read More
2019
caseHistory featured image

DPW London Gateway

DSP has been supporting DPW London Gateway for two months with their N4 Groovy extensions during a period of staff transition.

Read More
2017 - 2019
caseHistory featured image

APM Terminals Tanger Med 2

DSP is working in the Med 2 project since the beginning of 2018, providing Testing and Automation support for terminal go-live and XPS/N4 Installation and configuration and related training.

Read More
2018 - 2019
caseHistory featured image

TIV-Terminal Intermodale Venezia

18 month project during which DSP team has provided analysis, training, configuration and testing support, field development, go live guru support, post and go live support working both on and off sit.

Read More
2018 - 2019
caseHistory featured image

OPCSA Operaciones Portuarias Canarias

Over a 2 months project, DSP installed, connected and delivered the first set of DATAVIEW reports, including the Terminal Departure Report (TDR) and in a second phase, provided full training services, enable OPCSA team to generate independently new own reports, KPIs and analysis from DATAVIEW database. DSP DATAVIEW is a data analytics tool, based on […]

Read More
2019
caseHistory featured image

DPW Prince Rupert

DSP supported the transition of DP World Prince Rupert Terminal to the NAVIS N4 TOS. The expansion process of the Terminal required the transition from the legacy terminal operating system to Navis N4, which was successfully completed on October 2018.

Read More
2017 - 2018
caseHistory featured image

TMT – Trieste Marine Terminal

The project, started in January 2016 and has involved a strong and cohesive team composed by the Operations and IT personnel of TMT devoted to the project and by the experts of DSP. The introduction of NAVIS N4, included the algorithms of optimization expert decking, prime routes, has allowed to rationalise and to modernise all […]

Read More
2016-2018
caseHistory featured image

DPW Jeddah

DSP supported DPW Jeddah on N4 Go Live. After 4 months project the terminal switched its full operation to NAVIS N4 with no interruption of service or productivity. The key to success was the good knowledge of N4, proper tests, proper end user training and 100% commitment of all the terminal staff from Management down […]

Read More
2018
caseHistory featured image

APM Terminals Maasvlakte II

DSP has been involved in the implementation of Navis N4 at the new APM Terminals Maasvlakte 2 terminal. A state of the art automated facility with zero CO2 impact. At Maasvlakte 2 around 80% of crane movements are automated, with the remaining manual operations being performed remotely. Services provided by DSP included Business Process Mapping, […]

Read More
2013-2018
caseHistory featured image

NTB-North Sea Terminal Bremerhaven

In 2017 NTB has successfully completed the migration from its terminal operating system of SPARCS 3.7 and Express to Navis N4 version 3.1 thanks to a strong team composed of North Sea Terminal Bremerhaven GmbH&Co personnel, DSP experts and NAVIS consultants DSP took part in the NTB project from the beginning and has been involved […]

Read More
2017
caseHistory featured image

IMT – Intermodal Marine Terminal

DATAVIEW-DSP Business Intelligence software- is live at IMT a terminal who chose Master Terminal TOS by Navis. DATAVIEW is live since 2017 at Intermodal Marine Terminal in Genoa, Italy. DSP software grabs the data from the Master Terminal by NAVIS and combines it with financial figures, standard costs and revenue on our property datamodel and […]

Read More
2017
caseHistory featured image

APM Terminals Lazaro Cardenas

DSP has been partner of APM Terminals Lázaro Cárdenas since 2013  for the implementation of the Navis N4 TOS System and KALMAR SmartPort Solutions. The services provided by DSP in 4 years have been:  TOS Design and Analysis: DSP has been part of the project since June 2013, participating, consulting and contributing to develop the […]

Read More
2013-2017